To watch in HD, get ClipCafe PRO
WITH A STEEL PIN, THEY MOUNT A WHEEL ON EACH FORK
Please log in to add to collections.
How It's Made

WITH A STEEL PIN,THEY MOUNT A WHEEL ON EACH FORK. THE BLACK CIRCLE AT THE CENTERIS A BRAKE...

WITH A STEEL PIN,
THEY MOUNT A WHEEL ON EACH FORK. THE BLACK CIRCLE AT THE CENTER
IS A BRAKE DISK. NEXT, THEY INSTALL
A BRAKE CALIPER ON EACH WHEEL. WHEN THE RIDER
APPLIES THE BRAKES, THE CALIPER GRABS THE BRAKE
DISK, IMMOBILIZING THE WHEEL. NOW MECHANICS BEGIN ASSEMBLING
THE ENGINE BLOCK. USING A SPECIAL TOOL,
THEY INSTALL BEARINGS THAT ENABLE THE GEAR SHAFTS
TO TURN

Full Transcript

00:00:01.000 --> 00:00:05.068
WITH A STEEL PIN, THEY MOUNT A WHEEL ON EACH FORK.
00:00:05.068 --> 00:00:08.551
THE BLACK CIRCLE AT THE CENTER IS A BRAKE DISK.
00:00:11.068 --> 00:00:14.001
NEXT, THEY INSTALL A BRAKE CALIPER ON EACH WHEEL.
00:00:14.001 --> 00:00:16.344
WHEN THE RIDER APPLIES THE BRAKES,
00:00:16.344 --> 00:00:20.031
THE CALIPER GRABS THE BRAKE DISK, IMMOBILIZING THE WHEEL.
00:00:20.031 --> 00:00:23.689
NOW MECHANICS BEGIN ASSEMBLING THE ENGINE BLOCK.
00:00:23.689 --> 00:00:26.793
USING A SPECIAL TOOL, THEY INSTALL BEARINGS
00:00:26.793 --> 00:00:28.793
THAT ENABLE THE GEAR SHAFTS TO TURN.
Duration
30 seconds
Views
150
Timestamp in Movie
00:01:44
Uploaded
Sep 25, 2023
Season
14
Episode
2
Genres
documentary
Production
Productions MAJ,High Noon Entertainment

Want This Clip in HD?

Upgrade for HD/4K downloads and unlimited access. Upgrade now →

Movie Summary

Television series that documents how various everyday products are made.
S04 • E07 ONCE THEY'VE FINISHED CARVING THE DESIGN, - How It's Made 00:18
ONCE THEY'VE FINISHED CARVING THE DESIGN,
S03 • E04 THE NEXT MACHINE CUTS THE LENGTHS THEY'LL NEED - How It's Made 00:06
THE NEXT MACHINE CUTS THE LENGTHS THEY'LL NEED
S01 • E13 FABRICATION BEGINS WITH THE EXTERIOR SHELL. - How It's Made 00:25
FABRICATION BEGINS WITH THE EXTERIOR SHELL.
S04 • E06 FOR THE CUTS TO BE ACCURATE AND SMOOTH, - How It's Made 00:15
FOR THE CUTS TO BE ACCURATE AND SMOOTH,
S02 • E12 NOW THE ROBOTS TAKE THE FRONT-END STRUCTURE - How It's Made 00:08
NOW THE ROBOTS TAKE THE FRONT-END STRUCTURE
S01 • E08 THE CHASSIS IS MADE AS A HUGE MECCANO SET. - How It's Made 00:12
THE CHASSIS IS MADE AS A HUGE MECCANO SET.
S01 • E04 THIS CONGEALED MASS REPRESENTING THE EAR CANAL - How It's Made 00:09
THIS CONGEALED MASS REPRESENTING THE EAR CANAL
S02 • E05 ON THE WAY TO THE GREENHOUSE, - How It's Made 00:30
ON THE WAY TO THE GREENHOUSE,
S07 • E01 EACH OF THE SECTIONS GOES INTO A MACHINE - How It's Made 00:07
EACH OF THE SECTIONS GOES INTO A MACHINE
S14 • E07 USING A PLANER, HE REFINES THIS STARTING SHAPE - How It's Made 00:08
USING A PLANER, HE REFINES THIS STARTING SHAPE
S01 • E06 WHEN FULL, THIS ROLL WILL CONTAIN - How It's Made 00:30
WHEN FULL, THIS ROLL WILL CONTAIN
S02 • E10 THE CUT LICORICE GOES ON ALUMINUM TRAYS. - How It's Made 00:15
THE CUT LICORICE GOES ON ALUMINUM TRAYS.
S03 • E04 A WORKER FEEDS THOSE WIRE LENGTHS INTO ANOTHER MACHINE, - How It's Made 00:23
A WORKER FEEDS THOSE WIRE LENGTHS INTO ANOTHER MACHINE,
S07 • E04 A FIXTURE THEN FLIPS AND DIPS THE FORMS - How It's Made 00:11
A FIXTURE THEN FLIPS AND DIPS THE FORMS
S02 • E07 THAT THREAD GOES ONTO SPOOLS. - How It's Made 00:11
THAT THREAD GOES ONTO SPOOLS.
S05 • E11 AFTER THE EXPLOSION, LOADERS MOVE IN. - How It's Made 00:13
AFTER THE EXPLOSION, LOADERS MOVE IN.
S15 • E10 A plating machine applies heat and pressure - How It's Made 00:15
A plating machine applies heat and pressure
S02 • E03 NEXT, WORKERS INSTALL THE STRAPS - How It's Made 00:12
NEXT, WORKERS INSTALL THE STRAPS
S02 • E09 ELSEWHERE IN THE FACTORY, - How It's Made 00:11
ELSEWHERE IN THE FACTORY,
S05 • E08 NOW THAT HE HAS THE BASIC SHAPE, - How It's Made 00:32
NOW THAT HE HAS THE BASIC SHAPE,